Homing Settings for LongMills with the LongBoard controller
gSender Display
Diagnostic Tool or gSender Console output
Homing Settings for LongMills with the SLB controller
gSender Display
Enable the hard and Soft Limits
Diagnostic Tool or gSender Console
In the diagnostic tool or in the console, the following numbers will be reported.
If there is an issue with homing, check and confirm $22=77
In both cases the Location box will now display
Homing Settings with LongMills with SLB controller and Vortex
gSender Display
Diagnostic Report or gSender Console output
Location Display will show homing buttons for individual Axes