This will guide you through Remote Mode on gSender 1.5.0 and above.
- Connect to gSender
- Press the Phone icon on the top right corner, so that it turns green
3. In the following order: toggle on Enable Wireless Control, then select one of the dropdown options for Address (Addr:), then press Save.
4. Press Save Settings in the popup window.
5. Reconnect back to gSender, then press the Phone icon again
6. Use the QR code or text to access the Remote Control on your phone or computer.
If you get an error saying "Site cannot be found" or "Could not connect to server" when you go to the site, it means you will need to change the Address. Just select a different option in the drop down. Then save again and reconnect back into gSender.