Resources Link - https://resources.sienci.com/view/lmk2-spindle-kit/#machine-setup
| $ | Name | Value (number) | Units | Description |
|---|---|---|---|---|
| $30 | Maximum spindle speed | 24000 | RPM | Maximum spindle speed, can be overridden by spindle plugins. |
| $31 | Minimum spindle speed | 7500 | RPM | Minimum spindle speed, can be overridden by spindle plugins. |
| $37 | Steppers de-energize | X: OFF Y: OFF Z: ON A: OFF (4) | Keeps power to the stepper motors at all times | |
| $340 | Spindle at speed tolerance | 5 | percent | Spindle at speed tolerance as percentage deviation from programmed speed, set to 0 to disable. If not within tolerance when checked after spindle on delay ($392) alarm 14 is raised. |
| $374 | Modbus baud rate | 19200 (3) | ||
| $375 | Modbus RX timeout | 50 | milliseconds | |
| $392 | Spindle on delay | 11 | s | Delay to allow spindle to spin up after safety door is opened. |
| $395 | Current Spindle | H-100 VFD Spindle (6) | Spindle selected on startup. | |
| $476 | ModBus Address | 0 |